Control systems

Panels for regulating output and temperature in installations with and without electricity supply.

 

Ranging from solutions for individual temperature control via a heat thermal sensor connected to each brooder, for different comfort levels in the same installation, to centralized control of the system via connection to a computer or autonomous temperature controller built into the system.

 

Suitable for installations equipped with brooders from 1 to 12 kW.

PILOT centralized control panel

Centralized temperature control for PILOT brooder allowing a fine temperature adjustment of the building by means of a central computer or an ambient thermostat.

 

Equipped with solenoid gas valve (230 V AC 50/60 Hz) to be easily incorporated in an ON/OFF automatic control system.

 

Includes gas filter and pressure regulator up to 40 Kg/h

 

Suitable for Kroms Pilot 6 y 12 HP (propane) and  BP(propane/natural gas)

PILOT zone control panel

Zone temperature control for PILOT brooder allowing the temperature adjustment of different zones on individual way.

Suitable for Kroms Pilot 6 y 12 HP (propane) and BP(propane/natural gas)

E BP/HP control panel

Centralized temperature regulation system. Suitable for installations with central control PC

Equipped with thermoelectric head with Control On/Off slow opening/closing (modulating).

Built-in minimum setting regulators (20-100 mbar)

Power supply: 24 Vac/50 Hz .

Set point signal: 2 to 10 Vdc.

Manual operation in case of power failure

 

Suitable for Kroms 5 y 10 HP (propane) and BP (natural gas/propane)

This is image placeholder, edit your page to replace it.

Control EA BP/HP

Sistema de modulación de potencia, proporcional a una señal analógica de control. Es el adecuado para granjas con ordenadores de control central.   Equipado con un actuador termoeléctrico analógico.   Tensión 24 Vac/50 Hz .   Señal de control de 2 a 10 Vcc.   Regulador de presión ajustable para la potencia mínima 20-100 mbar.   Adecuados para Kroms 5 y 10 HP (propano) y BP (gas natural/propano)

C BP/HP control panel

Centralized temperature regulation system for large installations (without power supply)

 

Equipped with thermostatic valve.

Thermostatic sensor built into the end of a capillary tube of 15 m.

 

Suitable for Kroms 5 y 10 HP (propane) and BP (natural gas/propane

 

A gas filter and input regulator must be fitted.

Minitherm control panel

Centralized temperature regulation system for small installations (without power supply)

 

Equipped with thermostatic valve.

Thermostatic sensor built into the end of a capillary tube of 2 to 8 m.

 

Suitable for Kroms 5 y 10 HP (propane) and BP (natural gas/propane)

 

A gas filter and input regulator must be fitted.

KM12 climatic centralized control panel (proportional capacity)

Temperature regulation with power supply.

 

  • Centralized control systems equipped with servomotor
  • Has two sensors for averaging all-round temperature and allows progressive capacity modulation of the brooders
  • Power supply: 230 Vac / 50 Hz
  • Percentage display of power delivered and the throttle opening.
  • Manual operation in case of power failure

 

Suitable for Kroms 5 y 10 HP (propane) and BP (natural gas/propane)

VRT thermostatic regulation valve

Varing the output of Kromschroeder brooders and controlling the ambient temperature of the device is possible by incorporating the thermostatic regulation valve (VRT), enabling control of multiple comfort zones in a single facility. Its unique design provides smooth and automatic capacity adjustment of the device.

VRTs available with or without capillary, and with various modulation ranges and working pressures.

Available for KROMS brooder versions 1.5, 5 and 10.

Sensors built into the head and externally with 2-metre capillary tube

Pabellón: 3 / Calle : G / Stand: 718